Oil Drain Valves

Garden City, MI's Cost-Effective Oil Drain Valves for the Aviation Industry

In 1995, we designed and developed a new 'push-and-twist to lock open' oil drain valve. It was a unique design that received a US patent. This series of oil valve now covers most aviation engines made. The oil valve will accept a 3/8“ hose to drain the hot oil into a proper container for disposal. The standout feature is that the valve stays in place and does not need to be removed during the oil draining process. This means that you only have to safety wire it once, not every time you change the oil.

Lock Open & Two-Piece Aviation Oil Valves | Saf-Air Products - A5020 A5020

Lock Open Oil Drain Valves

Changing hot engine oil has never been easier! With the SAF-AIR Products, Inc. oil drain valve, no wrench is needed to remove the drain plug. A simple push-and-turn of the SAF-AIR valve locks it into the open position. The valve is made entirely from anodized aluminum and stainless steel components. These materials are used throughout the aircraft industry due to their strength and durability. FAA & PMA APPROVED.


  • Push-and-Turn to lock open
  • Effortless operation with a sure-grip knob
  • Double-sealed to prevent leakage
  • All valves can be rebuilt
  • Use a 3/8" ID drain hose (All valves)
  • Material: 6061 aluminum and 302 stainless steel
  • Finish: Anodized
  • Temperature: -60° to +260°F (-51° to +127°C)
  • O-Rings: Kits available from distributor

Lock Open & Two-Piece Aviation Oil Valves | Saf-Air Products - F10F10 (1-18)

Low Profile, Two-Piece Oil Drain Valves

This valve is the perfect choice for a close clearance engine oil drain application, such as on the Piper Arrow. These low profile oil drain valves are designed to clear retractable landing gears and other restrictions. The valve is very affordable and can be rebuilt. It is a simple procedure to sample or drain hot oil. Merely screw on the opener adapter and slightly open the valve for a sample, or fully open for complete drainage. The valve is made from 360 brass and 302 stainless steel. FAA & PMA APPROVED.


  • F175 (3/4" NPT) F167 (3/4-16) Picture not shown
  • All valves come with a F50-180 opener
  • Both openers use a 3/8" ID drain hose

To order a replacement oil valves , please visit our distributor list and place an order with your preferred provider. Or, for more information about our products, contact us today to speak to a representative.